FOR MAIL BOXES
PostFoam is a practical and convenient product that allows you to attach posts, fences, gates, mailboxes, signs or the like in a few minutes.
One bag of PostFoam replaces approx. 15 kg of concrete. PostFoam is mixed in the bag, poured into the hole around the post, and the liquid expands to fill the cavity between the ground and the post.
• Light and practical
• No water is required
• Works with all post types (wood, metal, vinyl, plastic)
• Water resistant when fully cured
• Protects wooden posts against rot and metal posts against corrosion
• Intended for non-load-bearing projects only
Rub the bag up and down a round edge with moderate force for 35-40 seconds. Make sure the liquid inside the bag moves from one end to the other with each movement
Empty the contents of the bag into the hole
After 5-7 minutes, the PostFoam has expanded so that 10-15 cm protrudes from the top of the hole
PostFoam has been tested and approved by the German analysis agency Currenta to ascertain that it has no negative impact on the soil.
Uncured PostFoam can be removed from utensils by wiping it with a cloth. Once PostFoam has hardened, they can only be removed mechanically (cut/sanded away).
It is important to avoid getting PostFoam on clothing as it is not completely removed. Use work clothes that can withstand getting dirty or disposable clothing.
The PostFoams locking rail is disposed of together with hard plastic. The rest of the packaging is disposed of together with small combustible waste
PostFoam should be disposed of together with small combustible waste.
Here you will find the data sheet: